garage

Konnected Smart Garage Door Opener blaQ

Konnected

mid local: excellentFully controllable on your LAN with no internet dependency. Wi-Fi
Price
$89 verified Nov 7, 2026
HA fit
excellent
Offline
yes
Setup
moderate
Hub needed
no

Amazon links are affiliate links: as an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Links to makers' own stores and other retailers are plain links that earn me nothing.

Konnected Smart Garage Door Opener blaQ - ESPHome-based garage door controller for fully local control with no cloud

Quick verdict

This is the garage door controller that Home Assistant users have been asking for. ESPHome firmware means it is discovered automatically, runs 100% locally, and will never break because a cloud API changed. It works with Chamberlain/LiftMaster Security+ 1.0 and 2.0 openers (not the newer Security+ 3.0). Installation requires basic wiring, but the result is bulletproof local control. Alexa and SmartThings work via Konnected's cloud connector, but its home is Home Assistant/ESPHome.

Standout: ESPHome-based garage door controller for fully local control with no cloud, no subscriptions, and no API breakage.

Notes last checked May 31, 2026.

Compatibility snapshot

Home Assistant excellentFull local control, no cloud needed. Native Home Assistant integration or a local protocol.
Apple Home noneNo official support on this platform.
Google Home noneNo official support on this platform.
Alexa goodWell supported, with only minor gaps.
Works offline yes
Setup moderate
Extra hub needed no
Power plug-in

Local control facts

  • Home Assistant: esphome integration, Local Push, Platinum on the quality scale (home-assistant.io, checked Oct 10, 2026)

Why it stands out

  • ESPHome-based means the Home Assistant path is 100% local with zero cloud dependency
  • direct MyQ alternative that actually works without subscription fees or API breakage
  • firmware is fully open and customizable. Flash your own ESPHome config if you want

Reasons to hesitate

  • no Google Home: Konnected names it nowhere. Alexa and SmartThings work through Konnected's cloud connector, and Apple Home needs Konnected's experimental HomeKit-native firmware flashed in place of the standard one
  • requires basic wiring to your garage door opener, not a pure wireless install
  • Wi-Fi only. If your garage has poor Wi-Fi coverage you will need to address that first

Best for

  • Home Assistant users who want dependable local garage door control with no cloud
  • anyone fleeing MyQ's cloud dependency, API changes, and subscription fees

Avoid if

  • you rely on Google Home, which Konnected does not list for this device; Apple Home works only if you give up the standard firmware for Konnected's experimental HomeKit-native build
  • you want a plug-and-play install with zero wiring

Privacy and local-control notes

The Home Assistant / ESPHome path is fully local with zero cloud and no account. Optional Alexa and SmartThings control routes through Konnected's cloud connector. Konnected also publishes an experimental HomeKit-native firmware for this device that pairs straight to Apple Home with no bridge and no cloud, but it replaces the standard firmware, which Konnected describes as the build with full feature support and Konnected-app integration.

Home Assistant support: supported · integration path: ESPHome.

Built with ESPHome - see the ESPHome guide for Home Assistant →

Buying reality check

Price notes: Fairly priced for a local-only garage controller. No recurring fees, unlike cloud-dependent alternatives.

Verified price reads: lowest seen $71.2, latest $89 on Nov 7, 2026.

  • Nov 7, 2026$89amazon
  • Oct 31, 2026$89amazon
  • Oct 24, 2026$89amazon
  • Oct 17, 2026$89amazon
  • Oct 10, 2026$89amazon
  • Oct 8, 2026$71.2amazon
  • Oct 7, 2026$71.2amazon
  • Oct 6, 2026$71.2amazon

Compare side by side: see garage comparisons →

Verified against

  • Konnected support: GDO blaQ platform integrations (integration. Konnected lists Apple Home (HomeKit), Home Assistant, Alexa, Hubitat and SmartThings for the GDO blaQ. Google Home is not listed.) · checked Nov 6, 2026
  • Konnected support: GDO blaQ with Apple Home (HomeKit) (spec. Konnected: the HomeKit native firmware "is an experimental alternate firmware for the Konnected GDO blaQ that enables direct integration with Apple Home (HomeKit) without requiring any third-party tools or bridges", and you can "return to the standard GDO blaQ firmware with full feature support" at any time.) · checked Nov 6, 2026

Spotted something wrong? Report an error on this page and I will check it against the source and fix it.

Buying guide for this category

No buying guide for garages yet. The compare table lines up every garage in the catalog on the same columns, which is the next best thing.

Compare garages →

Articles that mention this product

Black Friday smart home deals for Home Assistant: the prices to beat

Black Friday 2026 smart home deals for Home Assistant and local-control homes: the lowest price I've recorded for 100+ Zigbee, Z-Wave, Matter and Wi-Fi devices.

Read article →

Best local first garage door controllers

Find the best local-first garage door controllers for Home Assistant, with notes on ESPHome boards, Wi-Fi setup, and HomeKit and Hubitat integration.

Read article →

Smart home gift bundles, room by room

Gift ideas grouped into small bundles that make one room do something useful on day one, with the local-control and account requirements of every pick.

Read article →

Related garage products

Meross Smart Garage Door Opener MSG100HK - Native HomeKit support at a budget price for local Apple Home garage control

Meross Smart Garage Door Opener MSG100HK

budget

Meross

HA: good local: fair
Product notes →
Tailwind iQ3 Smart Garage Controller - Multi-door garage controller (up to 3 doors) with a local API for cloud-free control

Tailwind iQ3 Smart Garage Controller

mid

Tailwind

HA: good local: good
Product notes →
New guides and product notes, no inbox required. Follow via RSS →