SONOFF NSPanel Pro

Quick verdict

The NSPanel Pro is a wall-mounted touchscreen with a real Zigbee radio — exactly what you want for a smart home control point. The good news is that the stock Android-based firmware already does the heavy lifting: it exposes a built-in Zigbee 3.0 hub, offers an official eWeLink-to-Home Assistant Zigbee sync, and includes a Matter Bridge, and you can install a Home Assistant dashboard straight from the built-in F-Droid store — all without flashing. An eWeLink account is still used for setup and a few cloud features, so it is not zero-cloud out of the box. For tinkerers who want to go further, flashing Tasmota or ESPHome remains an optional advanced route. At this price, it is a capable, mostly local panel without a firmware project being mandatory.

Standout: A wall-mounted Android touchscreen with a built-in Zigbee 3.0 hub and Matter Bridge that sync into Home Assistant locally - no flashing or cloud required.

Last checked: 2026-05-31

Compatibility snapshot

Why it stands out

• wall-mounted touchscreen gives a dedicated control point for the whole house
• stock firmware includes a built-in Zigbee 3.0 hub and a Matter Bridge — no flashing required for local use
• official eWeLink-to-Home Assistant Zigbee sync, plus you can install a Home Assistant dashboard from the built-in F-Droid store
• optional Tasmota/ESPHome flashing available as an advanced route

Reasons to hesitate

• initial setup and some features still route through eWeLink cloud servers
• stock interface is functional but more basic than a full custom dashboard
• getting the most out of it (custom dashboards, Tasmota/ESPHome) still rewards tinkering

Best for

• users who want a wall-mounted panel that doubles as a built-in Zigbee 3.0 hub and Matter Bridge into Home Assistant
• people who want a Home Assistant dashboard on the wall without flashing, via the built-in F-Droid store

Avoid if

• you want zero dependence on a vendor cloud account, even for initial setup
• you prefer a polished native dashboard and do not want to install or configure any apps

Privacy and local-control notes

Stock Android-based firmware includes a built-in Zigbee 3.0 hub and a Matter Bridge, and Zigbee devices can be synced from eWeLink into Home Assistant locally, so meaningful local control is available without flashing. An eWeLink account is still used for initial setup and some cloud features. Flashing Tasmota/ESPHome is an optional advanced route that voids the warranty.

Home Assistant support: supported · integration path: eWeLink / custom firmware.

Buying reality check

Price notes: Affordable for a wall-mounted touchscreen panel that includes a built-in Zigbee 3.0 hub and Matter Bridge, which adds value beyond a plain display.

Compare side by side: see control panel comparisons →